Using relays in TPS Agent

Setup the relays Tibbits in visual LTPS Web Configurator or as described in Configuring TPS Agent:

Currently supported relays are:

• #03_1: Two low-power relays (configuration 1)
• #03_2: Two low-power relays (configuration 2)
• #06: Two high-power relays
• #07: Two solid state relays
• #15: High-voltage AC solid state relay

After writing settings and reboot LTPS Tibbits tab with subtab Relays will appear:

To operate the relays use the Relays tab: